Union Tool makes automated machines
that handle and process flat sheets, boards and panels made of wood, metal, glass, plastic, fibre or foam.

Recreational Vehicle (RV) Manufacturing — Union Tool is right in the heart of RV and motorhome country, and we've been making machinery for laying up floor, wall and ceiling panels since the industry first took off back in the War years. Travel trailers, mobile homes, fifth wheels, and towables of all kinds are made better, faster, and more profitably with Union Tool machines. These machines are adaptable to other industries as well; basically, anywhere large sheets and panels need to be laminated, coated, painted and glued up.

Metal Stamping, Drawing and Forming — From lubricant coating and painting to wire brush finishing, many Union Tool machines find homes in metalworking plants of all kinds. Stackers and feeders keep those sheets of aluminum, brass, steel, and other ferrous and non-ferrous metals moving down the processing line ...

Entry, Security and Garage Door Manufacturers — Like wall panels in the RV industry, doors are typically sandwich constructions — a frame or core covered with various types of facing panels front and back. Union Tool makes many roller coaters and laminators preferred by door makers, including our new 110-inch "twins" ... a matching hot melt roller coater / laminator pair, big enough to face both sides of a garage door substrate in a single pass.

EPS Foam — EPS foam sheets and panels are used in many manufacturing processes. Union Tool makes several machines specific to EPS foam, and many UT laminators, coaters, feeders and stackers can be adapted to handle EPS foam.

Plastics Packaging & Forming — From application of blister / skin pack material to silicone coating of plastic web materials prior to forming, Union Tool knows how to handle plastic sheets, films and panels.

Architectural Glass — Union Tool makes roller coaters specifically designed for glass substrates. The making of spandrel glass especially requires the particularly smooth paint coating that our Reverse Roller Coaters provide ...

Printed Circuit Board (PCB) Manufacturing — One of the primary requirements in the manufacture and assembly of printed circuit boards is protecting the surfaces of the boards, which means gentle handling by the edges. While most of the machines in this category are specific to the PCB industry, they can be adapted to handle delicate materials of all kinds where surface protection and precision handling are required.

FEED — Feeders, de-stackers, and pinch rollers are just a few of the machine types that send a steady stream of sheets into your processing line.

MOVE — Straight-line conveyors, 90° corner turns, straight / perpendicular dual mode conveyors, accumulators, and transfer buffers are just a few of the ways that Union Tool can keep your materials movin' on down the line ...

COAT — Paints, drawing compounds, lubricants, blister pack liquid vinyl, rubber gasketing compound, protective coatings, U/V coatings, silicone releases, and adhesives ... whatever you're spreading, these machines are smooth, clean, and precise. Coat top, bottom, or both at once!

GLUE — Resin adhesives, hot melts, water-based, solvent-based, phenolics ... whatever stickum you need to spread, there's a Union Tool gluing machine that handles the work.

LAMINATE — Laminate plastic film to EPS foam cores, wall panel "sandwiches," gasket flattening, film-to-panel, panel-to-panel, panel-to-frame ... if it goes together in layers, Union Tool has the machines to laminate it.

STACK — Just as Union Tool feeders push single sheets onto the processing line, Union Tool stackers pull the finished sheets off and stack them back up.

SPECIALTY — From electrical and electronic controllers that can literally run your whole processing line, to machines that convert EPS foam bead scrap into space-saving, easy-to-dispose-of sheets, Union Tool can engineer a solution to just about any production line challenge.