|
AUTOMATIC SHEET STEEL & STEEL PLATE FEEDER / DE-STACKERThis very large feeder for steel sheets and plates has a 30,000 pound hydraulic lift table. This machine, originally designed for a major steel processing plant, can de-stack and feed steel sheets from 24″ × 24″ × 16 gauge up to steel plates 72″ × 240″ × ½″ thick (yes, that’s right, 6 foot by 20 foot half-inch plate!). Feed rates are up to 6 cycles per minute. SYNONYMS Depending on your industry, you may call this a sheet feeder, an infeed de-stacker, a steel plate feeder, a sheet steel loader, a vacuum plate lifter, an indexing feeder, or a vacuum sheet feeder. Whatever you call it, this machine automatically lifts steel sheets or plates from a stack and positions them to the infeed conveyor of a processing machine or production line. OPERATIONAL DESCRIPTION When feeding smaller sizes, the vacuum heads will pick up 4 sheets at a time from 4 separate stacks. A touch screen allows the operator to select which vacuum cups are used for the various sheet sizes. The feeder moves sheets from stacks of steel and positions them on a built-in conveyer, which then moves the sheets or plates through downstream production line equipment, such as a brush cleaning system. This steel sheet / plate feeder is designed to be part of a complete automated system, with hydraulic lift table infeed, adjustable line height outfeed and line speed synchronization for complete production line integration. If material handling has created a problem in your production processes, let The Union Tool Corporation solve those problems with equipment to fit your needs. REQUEST A QUOTATION ON THIS MACHINE
|
©2003 The Union Tool Corporation
