|
WIRE BRUSH MACHINE
for Aluminum Sheet Texturing
Dual stainless steel brushes apply a scratch finish texture on aluminum
sheets to produce that "brushed aluminum" look.
SYNONYMS
Aluminum brush texturizer, wire brusher, scratch finisher, scratch
brush, aluminum scratch finish brush machine, or brushed aluminum surface
finisher.
OPERATIONAL DESCRIPTION
The Union Wire Brush Machine is designed to put a scratch finish on
aluminum sheets. The machine incorporates two stainless steel brushes
to obtain the desired brush finish. Along with the appropriate number
of hold-down rolls there is a perforated belt to hold the thin sheets
flat as they pass under each wire brush.
There is also a high-volume blower to pull a vacuum through the perforations
at each brush area. A brush on the offbearing side removes static from
the sheet as it leaves the machine. Each brush is adjustable vertically
to allow for various thicknesses of material.
The brushes are driven by a 10 H.P. motor while the conveyor and vacuum
system are each driven by a 1 H.P. motor.
MECHANICAL SPECIFICATIONS
| SERIES, MODEL NO. |
Series #35-26" Double Roll Machine |
| OVERALL DIMENSIONS |
Length: 71"
Width: 45"
Height: 60" |
| PRODUCT SIZE RANGE |
Up to 26" in width and 15" minimum length,
.010 to .125 in thickness |
| BRUSH ROLL DIMENSIONS |
Stainless steel brush roll is
8" in diameter x 26" long |
| HOODS |
Sheet metal enclosing both brushes with 8" dust
opening |
| PASS LINE HEIGHT |
34" |
| BRUSH ROLL MOUNTING |
Spring-loaded rolls mounted in self-aligning
bearings |
| MOTORS AND CONTROLS |
One 10 H.P. dual voltage TEFC
Two 1 H.P. dual voltage TEFC
110v pushbutton controls |
| OPERATING SPEED |
Variable speed on brushes 500 to 1500 RPM
Belt speed variable from 10 to 100 l.f.p.m. |
| SAFETY FEATURES |
Protective guards on rolls and chain drive
Static eliminator on infeed and offbearing sides of the conveyor |
|
TYPICAL INDUSTRY / APPLICATIONS:
Door Manufacturing • EPS Foam • Plastic Packaging & Forming
Printed Circuit Board (PCB) Manufacturing
• Recreational Vehicle (RV) Manufacturing
Metal Stamping, Drawing and Forming
• Architectural Glass
THE UNION TOOL CORPORATION
Mailing Address: P.O. Box 935 • Warsaw, IN 46581
Shipping Address: 1144 N. Detroit St. • Warsaw, IN 46580
Phone: (574) 267-3211 •
Fax: (574) 267-5703
E-mail: webinfo@uniontoolcorp.com
©2003 The Union Tool Corporation
