Request For Quotation ...

UNION TOOL AUTOMATIC ROLLER COATERS
Use this form to provide basic specifications for a Union Tool roller coater. In general, unless otherwise specified, please express linear measurements in Inches and decimal fractions of Inches, and weights in Pounds and decimal fractions of Pounds.

Union Tool roller coaters are available in several roll configurations, including:
    Single-sided, top only
    Single-sided, bottom only
    Single- or double-sided, switchable; change from a bottom-only single-sided coater to a top-and-bottom double-sided coater with the flip of a switch, on the fly!
    Double-Sided, top and bottom at the same time
    Single-sided Reverse Action, top only; for ultra-smooth coatings, typically used with glass substrates

This is a:

1-Sided Coater (Top Only)
1-Sided Coater (Bottom Only)
1- & 2-Sided Coater (Both Sides or Bottom Only)
2-Sided Coater (Top and Bottom)
1-Sided Reverse Action Coater (Top Only)

MATERIAL TO BE COATED:

Wood
Metal
Paper
Plastic
Foam
Fibreboard
Glass
Other Please specify:

DIMENSIONS OF MATERIAL TO BE COATED: (in Inches)

Width:	Minimum	Maximum
Length:	Minimum	Maximum
Thickness:	Minimum	Maximum

Is material in uniform pieces? Yes No

Is material coiled? Yes No

Maximum surface speed required (L.F.P.M.*):
(*L.F.P.M. = Linear Feet Per Minute)

Is variable-speed drive required? Yes No
If "Yes," what range? From L.F.P.M. to L.F.P.M.

ELECTRICAL REQUIREMENTS:

Voltage:
480/240
110

Cycles:
50
60

Phase:
3-phase
1-phase

COATING MATERIAL TO BE APPLIED:

Type:

Hot Melt Adhesive
Other Adhesive
Protective Coating
Drawing Compound
Stamping Lubricant
Paint
Other Please specify:

Thickness or Amount:

Consistency or Viscosity:

(If unknown, omit.)

Application Conditions:

Does application require heat? Yes No
If "Yes," what temperature? °F

What solvents or thinners will be used?

COMMENTS AND SPECIAL REQUIREMENTS:
(Please include a brief description of your process and the finished product.)

Your Name:

Company:

Address:

City:

ST / ZIP:

Country:

Phone:

(Example: 999-999-9999)

Fax:

(Example: 999-999-9999)

E-Mail:

TYPICAL INDUSTRY / APPLICATIONS:
Door Manufacturing • EPS Foam • Plastic Packaging & Forming
Printed Circuit Board (PCB) Manufacturing • Recreational Vehicle (RV) Manufacturing
Metal Stamping, Drawing and Forming • Architectural Glass

THE UNION TOOL CORPORATION
Mailing Address: P.O. Box 935 • Warsaw, IN 46581
Shipping Address: 1144 N. Detroit St. • Warsaw, IN 46580
Phone: (574) 267-3211 • Fax: (574) 267-5703
E-mail: webinfo@uniontoolcorp.com

FEED
MOVE
COAT
GLUE
LAMINATE
STACK
SPECIALTY

FAQs
PDFs
QUOTES
CONTACT
ABOUT
HOME