Door Manufacturing Roller Coaters and Laminators.
Like wall panels in the RV industry, doors are typically sandwich constructions - a frame or core covered with various types of facing panels front and back. Union Tool makes many roller coaters and laminators preferred by door makers, including our new 110-inch "twins" ... a matching hot melt roller coater / laminator pair, big enough to face both sides of a garage door substrate in a single pass.
110-inch DUAL HEAD HOT MELT ROLLER COATER - A really big hot melt roller coater for the lamination of wall panels, ceiling panels and floor panels in the recreational vehicle (RV), mobile home, and fifth-wheel towables industries. Coats one side or both sides of the substrate in a single pass; single or double sided coating modes selectable with the flip of a switch. Combined with the 110" Rotary Laminator (below), this makes a complete laminating station for very large panels.
110-inch ROTARY LAMINATOR - A really big rotary laminator for wall panels, ceiling panels and floor panels in the recreational vehicle (RV), mobile home, and fifth-wheel towables industries. Provides laminating pressure for panel sandwiches of substrate cores and facing sheets. Combined with the 110" Dual Head Hot Melt Roller Coater (above), this makes a complete laminating station for very large panels.
HOT MELT ROLLER COATER, Series #15, Model A - Hot Melt Roller Coater designed to apply hot melt coatings such as wax, contact adhesive, PUR adhesive, pressure sensitive adhesive or virtually any coating material that requires heat for roller coater application.
DUEL HEAD HOT MELT ROLLER COATER - This dual head hot melt roller coater applies hot melt to the bottom side, or both sides, of the substrate in one operation. Handles material to 54" wide. Switch between single-sided and double-sided coating with the flip of a switch.